Generac Dives Into Residential Energy Storage With Seamless Solar Integration #SPI2019
Credit to Author: Kyle Field| Date: Mon, 07 Oct 2019 19:30:52 +0000
Published on October 7th, 2019 | by Kyle Field
October 7th, 2019 by Kyle Field
CleanTechnica met up with Generac’s Chief Marketing Officer and president of its new clean energy business, Russ Minick at SPI 2019, to talk about the company’s big pivot into energy storage products to learn more about where that strategy came from.
At SPI2019, Generac and its team of Patagonia vest clad associates rolled out a new home energy storage system based largely on the units designed by Pika Energy, which Generac acquired earlier this year. The company injected the brain of the solution, the PWRcell inverter, with intelligence from another acquisition, Neurio Technologies, adding home energy usage monitoring and much more through its new PWRview tool.
The addition of Neurio’s intelligent energy management and monitoring tech also enabled integration with another renewables star: residential solar systems. The ability to not only harness energy in the battery for later use, but to enable homeowners to run off of that power for hours or days in the event of a grid outage resonated with Generac’s core customer base.
Customers looking to add a generator to keep their home and refrigerator running through a power outage caused by a storm were thrilled at the prospect of a system that taps into the unlimited resource of the sun without the need for any additional fuel. Sharing the PWRcell inverter slashes the cost of having to purchase a second inverter for the home solar system and makes the combined solar-plus-storage that much more affordable.
Each Generac PV Link optimizer can connect up to 9 solar modules to Generac’s PWRcell inverter. Image courtesy: Generac
Exploring the potential of rooftop solar integration led Generac to not only allow for a direct connection of a rooftop solar system to its PWRcell inverter, but to develop a suite of products that intelligently integrate an on-site solar installation with the overall home energy system.
After the solar modules themselves, the first point of connection for a single inverter solar system is typically to a dedicated DC optimizer for each panel. Generac took the idea one step further with its PV Link Substring Optimizer (diagram above) that can control up to nine PV modules per unit. That cuts the number of connections required for installers and minimizes the potential points of failure in a rooftop solar system.
The Generac SnapRS. Image credit: Kyle Field | CleanTechnica
Working our way down the rooftop solar trunk cable that connects all the modules together, current NEC code requires a rapid shutdown device to be installed within a few feet of each solar array. These are typically dedicated devices that require their own enclosure. That equates to more cost and more space in the home that must be dedicated to the solar system. For example, in our Tesla Solar Roof installation, we have ~10 of these rapid shutdown devices, each enclosed in a dedicated ~12″ x 12″ x 4″ enclosure in our attic space.
Generac instead built rapid shutdown functionality into a new device dubbed the SnapRS that provides the capabilities required to satisfy NEC code requirements, but at the module level. These new devices (pictured above) contain no moving parts and require no special enclosures. That is a game changer when it comes to installing rapid shutdown devices for a home solar system. They require far less space as they can be installed along the trunk cable under the modules themselves and are much quicker to install.
We were impressed to see just how much work Generac had done to integrate the solutions from Pika and Neurio into a new line of fully integrated Generac products in just a matter of months. Just a simple rebranding would take longer than that at most companies, and Generac is already looking beyond this first generation of products at more opportunities that will take its already innovative line of products to the next level.
At SPI, they took us into the back room and talked us through some concept photos and product specs for the next generation of products that are already in the works. For starters, Russ told us about Generac’s new “third box” that will take the place of the circuit breaker box in a typical home. “We’re going to put it in a third box,” he said. “That box will have the Neurio intelligence in it. You can be wifi connected or wire connected or cellular connected.”
Adding connectivity and intelligence opens the door for Generac to begin not only generating power with a rooftop solar system, storing it in an intelligent home battery, but also actively controlling the loads within the home. “What you’re starting to see is the promise of load management,” Russ said. “There’s going to be load management on circuits you want load managed. It’s whole house, so no more select circuits.”
The integration of all of the major electrical systems in the home enables homeowners to prioritize loads in the home based on the available stored energy. “This is going to be pretty good for power outages,” Russ said. “You’ll be able to prioritize what loads you want.”
In addition to the new smart panel, Russ is pushing to increase the energy density of the battery which translates to an increase in overall capacity. “Today we’re at 17.1 kWh. We’re going to 19.9 kWh,” he said. That is coming along with a new active thermal management system that will have the capability to both heat and cool the batteries for maximum performance, regardless of the temperature outside.
Kyle Field I’m a tech geek passionately in search of actionable ways to reduce the negative impact my life has on the planet, save money and reduce stress. Live intentionally, make conscious decisions, love more, act responsibly, play. The more you know, the less you need. TSLA investor.